End Suction Pumps


DB End Suction Pump
Send Enquiry

Product Details

Brand Name Kirloskar
Delivery Size up to 150 mm
Capacity up to 550 m³ /hr
Head up to 100 m
Temperature (-) 10 °C to 100 °C

With a back pull out design these pumps are gland packed or mechanically sealed and are used for air conditioning, booster service, firefighting and sprinkler system. Delivery size varies from 32 mm to 150 mm.

Features

  • Conforming to DIN 24255
  • Back pull-out design
  • land packed / Mechanical seal
  • 50HZ / 60 HZ availability

Applications

  • Air Conditioning
  • Sprinkler systems
  • Fire fighting
  • Booster service

Yes! I am interested


CE End Suction Pump
Send Enquiry

Product Details

Brand Name Kirloskar
Delivery Size up to 125 mm
Capacity up to 660 m³ /hr
Head up to 100 m
Temperature up to (-) 10 °C to 140 °C

These pumps are of single stage with back pull out type suitable for 3500 rpm. These are either gland packed or mechanically sealed and delivery size can be up to 125 mm. These are very useful in air conditioning, water supply, fire-fighting and booster services.

Features

  • Confirming to DIN 24256 and ISO 2858
  • Single stage with back pull-out type design
  • Suitable for 3500 rpm
  • Gland Packed / Mechanical Seal

Applications

  • Air conditioning
  • Fire fighting
  • Booster services
  • Water supply
  • Sprinkler system
  • Handling clear and turbid water up to 3000 ppm

Yes! I am interested


CPHM End Suction Pump
Send Enquiry

Product Details

Brand Name Kirloskar
Delivery Size up to 200 mm
Capacity up to 750 m3 /hr
Head up to 150 m
Temperature up to (-) 30 °C to 90 °C

These pumps can be driven by electric motor or engine. The impellers are of enclosed type and are balanced statically and dynamically. The casing has axial suction and top centre line delivery. Smooth hydraulic passages ensure high efficiency.

Features

  • Conforming to DIN 24256, ISO 2858
  • Back pull-out design
  • Gland Packed / Mechanical Seal
  • 50 Hz / 60 Hz availability

Applications

  • Booster Service
  • Fire fighting
  • Air-conditioning

Yes! I am interested


MF End Suction Pump
Send Enquiry

Product Details

Brand Name Kirloskar
Delivery Size up to 650 mm
Capacity up to 7000 m³ /hr
Head up to 30 m
Temperature up to (-) 5 °C to 140 °C

These low head high capacity pumps can be either gland packed or mechanically sealed. Delivery options can be of either horizontal or vertical. These are majorly used in air conditioning, irrigation, drainage and storm water. Delivery size can vary from 200 mm to 650 mm.

Features

  • Low head, high capacity pumps
  • Gland packed / Mechanical Seal
  • 50HZ / 60 HZ availability
  • Option available in horizontal as well as vertical delivery position

Applications

  • Drainage
  • Storm water
  • Irrigation
  • Air-conditioning

Yes! I am interested


GK End Suction Pump
Send Enquiry

Product Details

Brand Name Kirloskar
Delivery Size from 65 to 125 mm
Capacity from 20 to 450 m3/hr
Head up to up to 60 meters
Working Pressure up to 16 bar
Temperature up to 90° C

GK Pumps are conforming to ISO: 5199 & dimensionally are fully conforming to ISO 2858 / EN: 22858. These pumps are horizontal back pullout design, radially split, single stage, centrifugal end suction volute with top centerline delivery. Pump feet are integrally cast with delivery casing. Impeller is of an enclosed type. Bearing housing is fitted with a support foot. Pump shaft is supported by grease lubricated anti friction deep groove ball bearings as a standard scope of supply. GK pumps are mainly used for clean and clear liquids which are free from suspended solids\particles.

Features

  • Highly energy efficient.
  • Pump with mechanical seal & gland packing arrangement.
  • Sealing/flushing water not required.
  • Self-venting design.
  • Pump with back pull out design.
  • Compact design & wide interchange...

Read More...


Yes! I am interested


DBL End Suction Pump
Send Enquiry

Product Details

Brand Name Kirloskar
Delivery Size up to 300 mm
Capacity up to 1900 m³ /hr
Head up to 35 m
Temperature up to (-) 10 °C to 90 °C

These pumps find wide Applications in water transfer, water supply, irrigation, agriculture, farms, sprinkler, domestic house hold requirements, building and construction and general industry. High efficiency, robust case construction of cast iron, impeller construction of bronze makes these pumps an ideal selection for Applications that require easy-to-maintain, reliable, long lasting pumps. Developed by experienced pump engineers of KBL–a leading manufacturer, dealer and distributor of pumps which are designed to perform as per the actual service conditions.
   
Features

  • Back pull-out design
  • Gland Packed / Mechanical Seal
  • 50 Hz / 60 Hz availability

Applications

  • Aqua culture
  • Water supply
  • Irrigation
  • Sugar Industries

Yes! I am interested


SHM End Suction Pump
Send Enquiry

Product Details

Brand Name Kirloskar
Delivery Size up to 200 mm
Capacity up to 2200 m³ /hr
Head up to 150 m
Temperature up to (-) 50 °C to 350 °C

These pumps are developed for process Applications and are generally conforming to API 610. These are gland packed or mechanically sealed. These pumps are ideal for air conditioning, condensate extraction, distilleries, edible oil sugar and textile. Delivery size ranges from 20 mm to 200 mm.

Features

  • Conforming to DIN 24256 and ISO 2858
  • Back pull-out design
  • Generally conforming to API 610
  • Gland Packed / Mechanical Seal
  • Also available in vertical execution

Appications

  • Air-Conditioning
  • Condensate Extraction
  • Distilleries
  • Edible Oil, Sugar, Textile and Process Industries
  • Water Treatment Plants

Yes! I am interested


SHL End Suction Pump
Send Enquiry

Product Details

Brand Name Kirloskar
Delivery Size up to 200 mm
Capacity up to 800 m³/hr
Head up to 90 m
Temperature up to (-) 10 °C to 140 °C

SHM are horizontal non-clog pumps having single stage, single suction with back pull out type design. SHS are vertical non-clog pumps for wet pit Applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. For SHM pumps the standard lubrication is grease and the optional one is oil. In case of SHS pumps the lubrication is grease based. These pumps are widely used in paper industries, water carrying gravel and so on.

Features

  • Solid size up to 105 mm
  • Back pull-out design
  • Gland packed / Mechanical Seal
  • 50 Hz / 60 Hz availability
  • Also available in vertical execution

Applications

  • Sludge
  • Sewage
  • Power material slurries
  • Sugar factory waste

Yes! I am interested